Product Features

◎ Built-in dust collection, reducing floor space, and overall beautiful.

◎ Double Servo Table, improve the accuracy of table entry and exit.

◎ Fully enclosed dust-proof moving shaft, prolonging the life of the screw.

◎ Tool slide detection to prevent cutting off the knife.

◎ Dust full reminder, effectively prevent filtration blockage.

◎ DXF introduction, calibration MARK can be cut, improve cutting accuracy.

◎ Fixture barcode recognition, automatic retrieval program.

◎ Visual edge-finding cutting to improve cutting accuracy.

High speed spindle

The use of high-speed spindle motor, long service life, easy loading and unloading, cutting surface smooth without burrs, flaws.

Double Servo Table

Utilize servo-driven working platforms to alternately process and place PCB substrates, reduce waiting time, increase energy,

The speed is increased and the accuracy problem of the cylinder drive platform is solved.

visual system

◎ 5 million pixel color CCD with 6MP high resolution lens and LED light, program teaching and simulation, automatic MARK positioning and anti-stupid.

The camera also has barcode reading, and the data can be uploaded to MES.

Follow-up dust removal

Use follow-up technology to control the suction port, follow the cutter to move the vacuum at the same speed, and thoroughly collect the cutting dust; ensure the service life and accuracy of the spindle. Exclusively designed KE-301 vertical dust box, with a small footprint and a noise of about 65 decibels.

safety protection

Electric lifting safety door, and optional safety grating, independent protection of left and right countertops, used to fully protect operators

To ensure safety and avoid accidents.

program editor

Executable straight line, round, L-shaped, O-shaped, arc and other input, with a link plate array copy, left and right table copy, track batch modification (delete/insert, etc.), image scaling and other convenient and fast editing methods, easy to use

Tool magazine management

The number of segments can be set according to the blade length (milling cutter tooth length) and PCB product thickness, single segment length, single segment length

The segment can be cut at a distance to maximize the value of the milling cutter.

Broken knife and sliding knife detection

During production, check whether the tool is broken or slid down to prevent PCBA damage caused by tool slippage during use.

Sliding safety door (optional)

To increase safety and reduce cutting noise, the entire door can be optionally pushed and pulled. When the safety door is not closed, the operator cannot start the cutting of the corresponding countertop, thus ensuring safe operation.

Automatic cover function (optional)

Equipped with automatic cover function, when the board is placed on the fixture and TABLE goes in to cut, the equipment will automatically cover the cover, improve cutting accuracy and prevent the board from flying when cutting.

Fully enclosed dust-proof module

X, Y1, Y2 modules are fully enclosed and dustproof to ensure the accuracy of the screw and prolong the service life.

Automatic tool change function (optional)

Optional 8 or 16 tool magazines, the milling cutter can automatically complete the tool replacement function when it reaches the set life or detects the tool break or slide.

DXF import function

Importing DXF documents can quickly generate cutting paths, and online programming takes 2 minutes to improve cutting accuracy.

Single point knife depth

When cutting some PCBA products, sometimes there are components below a certain cutting point. In order to ensure that the components below the cutting point are not cut, it is especially important to modify the single-point cutting depth.

Single point speed modification

We sometimes encounter cutting plates of different sizes together, causing the small plates to fly or cut unevenly when cutting at the same speed as the large plates. At this time, we need to modify the cutting speed of the small plates separately to ensure the cutting quality without affecting the overall cutting speed.

Barcode recognition function (optional)

Using a CCD camera or adding a code reader, 1D/2D barcodes can be read and saved or uploaded to MES for easy tracking and digital management.

Visual edge finding system (optional)

Using the automatic edge seeking system, the edge seeking cutting setting can be selectively selected. After visual correction, the influence of PCB and fixture tolerances on the sub-board accuracy can be eliminated, and the cutting accuracy can be improved. It can be used in high-precision cutting occasions.

Tool diameter identification system (optional)

The use of tool diameter identification can effectively prevent the wrong tool diameter from being placed artificially and the cutting scrap caused by mistakes.